You can see Sense Nano data in the cloud using the web applications. If you are in the room with a Sense Nano you can also see data by connecting to it with Lens on your iPhone.

To observe sensor data using the Lens app:

1. Open the Lens app on your iPhone.
2. Navigate to the digital twin building, then tap the floor of the Sense Nano sensor you want to collect data from.
3. Find the sensor you need, and tap the icon that represents a provisioned sensor.
   Tip: For sensor and sync icon details, see "Sensor and profile icon states in Lens."
   The associated sensor card opens at the bottom of the screen.
4. Tap the sensor icon on the top right corner of the sensor card.
   
   Note: If a sensor card blocks a sensor on the floor, you can drag the card down and out of the way. You can also pinch your screen to zoom in/move the screen around to change the view.
   Tap the sensor icon again to bring the card back.
   The Diagnostics screen opens to start the connection process.
5. Align the hexagon on the screen of your device with the hexagon of the PassiveLogic logo on the Sense Nano until their edges are aligned.
6. Once aligned, tap the Connect button at the bottom of the screen.
   Your phone will flash to communicate with the sensor. Don’t move it during this process.

7. Hold your device camera steady to keep the hexagons aligned until the hexagon on screen turns fully orange and Finding appears on screen. 

   The sensor will flash and the connecting process will proceed until you are connected.

   Once connected, you will see the monitoring screen. It will populate with live data for 5 minutes or until you tap Done. Historical data from the Sense Nano sensor automatically syncs to the cloud via the QuantumSync™ process.
   

8. When you are ready to leave the sensor, tap Done.

Next...

Data Analysis: To learn how to view, interact with, and export environmental data from a building, see “Analyzing Data.”